25D 系列
YDS
14PIN DIL 包装。
效率高达85% 。
内部为SMD结构。
非稳压输出类型。
操作环境温度:-40℃ 至 +85℃ 。
不需外部零组件。
工业标准引脚。
Part Number | Output2 | Efficiency | |
---|---|---|---|
Voltage (VDC) | Current (mA) | %TYP | |
25D-XXDXX03NNL | 3.3 | 150 | 70 |
25D-XXDXX05NNL | 5 | 100 | 75 |
25D-XXDXX09NNL | 9 | 56 | 75 |
25D-XXDXX12NNL | 12 | 42 | 75 |
25D-XXDXX15NNL | 15 | 34 | 75 |
25D-XXDXX24N2NL | 24 | 21 | 75 |
Note:
1.”XX” Is Voltage:03=3.3Vdc,05=5Vdc,09=9Vdc 12=12Vdc,15=15Vdc,24=24Vdc.
2. 3.3V for output only, not for input.
3. The input voltage increases, there will be an increase in efficiency.
4. Over 24Vdc input voltage or Output voltage, using the 2nd package
Parameters | Conditions | Min | Typ | Max | Units |
---|---|---|---|---|---|
Voltage Tolerance | Vo,Io Nom | ±5 | % | ||
Filter | Capacitor |
Parameters | Conditions | Min | Typ | Max | Units |
---|---|---|---|---|---|
Voltage Tolerance | 100% full load | ±5 | % | ||
Short Circuit Protection | Short Term | 1 | Sec | ||
Line Regulation | For 1.0% of Vin | 1.2 | % | ||
Load Regulation | 3.3V,5V (10% To 100% F.L) | 15 | % | ||
Load Regulation | 9V,12V,15V,24V (10% To 100% F.L) | 10 | % | ||
Ripple & Noise | BW=DC To 20MHz | 100 | mVp-p | ||
Transient response setting time | 50% load step change | 350 | us |
Parameters | Conditions | Min | Typ | Max | Units |
---|---|---|---|---|---|
Isolation Resistance | 500Vdc | 1000 | MΩ | ||
Switching Frequency | Full load, nominal input | 100 | KHz | ||
Operating Temperature | -40 | +85 | ℃ | ||
Humidity | Non Condensing | 95 | % | ||
Cooling | Free air Convection | ||||
Case material | DAP | ||||
MTBF | MIL-HDBK-217F@25℃ | 3500000 | Hours | ||
Weight | 2.3 or 2.8 | g | |||
Dimensions | 20.32 x 10.16 x 6.80 | mm | |||
Dimensions | 20.32 x 10.16 x 7.70 | mm |
Files Download 25D-Series.pdf
14PIN DIL 包装。
效率高达85% 。
内部为SMD结构。
非稳压输出类型。
操作环境温度:-40℃ 至 +85℃ 。
不需外部零组件。
工业标准引脚。
Part Number | Output2 | Efficiency | |
---|---|---|---|
Voltage (VDC) | Current (mA) | %TYP | |
25D-XXDXX03NNL | 3.3 | 150 | 70 |
25D-XXDXX05NNL | 5 | 100 | 75 |
25D-XXDXX09NNL | 9 | 56 | 75 |
25D-XXDXX12NNL | 12 | 42 | 75 |
25D-XXDXX15NNL | 15 | 34 | 75 |
25D-XXDXX24N2NL | 24 | 21 | 75 |
Note:
1.”XX” Is Voltage:03=3.3Vdc,05=5Vdc,09=9Vdc 12=12Vdc,15=15Vdc,24=24Vdc.
2. 3.3V for output only, not for input.
3. The input voltage increases, there will be an increase in efficiency.
4. Over 24Vdc input voltage or Output voltage, using the 2nd package
Parameters | Conditions | Min | Typ | Max | Units |
---|---|---|---|---|---|
Voltage Tolerance | Vo,Io Nom | ±5 | % | ||
Filter | Capacitor |
Parameters | Conditions | Min | Typ | Max | Units |
---|---|---|---|---|---|
Voltage Tolerance | 100% full load | ±5 | % | ||
Short Circuit Protection | Short Term | 1 | Sec | ||
Line Regulation | For 1.0% of Vin | 1.2 | % | ||
Load Regulation | 3.3V,5V (10% To 100% F.L) | 15 | % | ||
Load Regulation | 9V,12V,15V,24V (10% To 100% F.L) | 10 | % | ||
Ripple & Noise | BW=DC To 20MHz | 100 | mVp-p | ||
Transient response setting time | 50% load step change | 350 | us |
Parameters | Conditions | Min | Typ | Max | Units |
---|---|---|---|---|---|
Isolation Resistance | 500Vdc | 1000 | MΩ | ||
Switching Frequency | Full load, nominal input | 100 | KHz | ||
Operating Temperature | -40 | +85 | ℃ | ||
Humidity | Non Condensing | 95 | % | ||
Cooling | Free air Convection | ||||
Case material | DAP | ||||
MTBF | MIL-HDBK-217F@25℃ | 3500000 | Hours | ||
Weight | 2.3 or 2.8 | g | |||
Dimensions | 20.32 x 10.16 x 6.80 | mm | |||
Dimensions | 20.32 x 10.16 x 7.70 | mm |
Files Download 25D-Series.pdf